Quality

It is quality rather than quantity that matters to us.

Home / Zinc / Quality

ISO 9001:2015 specifies requirements for a quality management system when an organization:
a) needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and
b) aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
All the requirements of ISO 9001:2015 are generic and are intended to be applicable to any organization, regardless of its type or size, or the products and services it provides.

  • download file/

    • RoHS is a product level compliance based on the European Union's Directive 2002/95/EC, the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHS).

    Products compliant with this directive do not exceed the allowable amounts of the following restricted materials: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE), with some limited exemptions.

    Products compliant with this directive do not exceed the allowable amounts of the following restricted materials: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE), with some limited exemptions.

  • download file/

    • Technical data, as defined by the FAR, is “recorded information (regardless of the form or method of the recording) of a scientific or technical nature (including computer databases and computer software documentation).” See FAR 52.227-14; DFARS 252.227-7013.

  • download file/
    • In house laboratory
    We perform full service materials testing in our in house laboratories. We feel strongly about the superior quality control offered by maintaining our own testing facilities and employing certified laboratory staff, thereby ensuring accuracy. In addition to reliable test results, our in house facilities provides for quicker results, helping to assure our client's projects will remain on schedule.
    Certification
    The raw material we use, HZL zinc ingot, has obtained accreditation and quality endorsements at national and international levels.BPPL has also been accredited with ISO9001 certification for quality..
    Testing / Reports
    To ensure the mechanical properties of the product the conduct tensile & elongation test in order to ensure conformance according to the product standards. We use top of line rolling & drawing lubricators their wire good surface finish on the product. Every order dispatched is sent with chemical and mechanical reports.
    Chemical Composition
    PB (Nominal) < 0,003 (typical) 0,0005
    Cd (Nominal) < 0,003 (typical) 0,0004
    Fe (Nominal) < 0,002 (typical) 0,0013
    Sn (Nominal) < 0,001 (typical) 0,0005
    Cu (Nominal) < 0,001 (typical) 0,0007
    Ai (Nominal) < 0,001 (typical) 0,0009
    Tensile strength N/mm2 100-120 (±5)
    Elongationat rupture 40% minimum
    Material Safety Data Sheet
    A Material Safety Data Sheet (MSDS) is a document that contains information on the potential hazards (health, fire, reactivity and environmental) and how to work safely with the chemical product.
  • download file
    • General Properties
    Various standard products are available from stock. Special dimensions are produced according to customer specifications. BPPL zinc wires are characterized by their particularly high purity and are made of special high-grade zinc (Zn 99,995 %) according to DIN EN 1179.
    Packing Units:
    – Endless wire in fibre drums (with inner cylinder)
    – Endless wire in metal drums (with inner cylinder)
    – Spools (SD 300 or SH 390)
    – Coils in PE foils

    From Our Clients

    Our clients praise us for our quality, personable service, expert knowledge and on-time delivery. Here are what just a few of them had to say:

     March 14, 2016

    JINDAL SAW GULF L.L.C.

    “We have been procuring Zinc wires from M/s Bhuj Polymers Pvt Ltd. since 2013 for manufacture of Ductile Iron Pipes. Since we are ISO 9001, ISO 2531, BSEN 545 certified .We adhere to the highest quality standards.”

    — PANKAJ BANSAL, HEAD (COMMERCAIL)

    July 08, 2018

    MAURIA UDYOG LIMITED

    “It is of paramount importance that we have a dependable vendor who meets our quality, quantity and supply schedules diligently, while offering competitive pricing. BPPL have exceed our expectation .”

    — M RAI, MANAGER (COMMERCIAL)

    March 26, 2019

    SAI PVT LTD

    “We have been exclusively purchasing Zinc wires from M/s Bhuj Polymers Pvt Ltd. since last 3+ years.We are delighted that we have found a trust worthy and indispensable partner.”

    — MANOG GOYAL, HEAD OF PURCHASE

    Copyright © 2020 Bhuj Polymers Pvt Ltd. All rights reserved.